Filter
Top Products
Replacing a Mini-Card
1. Insert the Mini-Card connector into the system board connector at a 45-degree angle.
2. Press the other end of the Mini-Card into the securing tabs until the card clicks into place.
3. Connect the black antenna cable to the connector labeled with a black triangle, and connect the white antenna cable to the connector labeled with a
white triangle.
1
system board connector
2
Mini-Card
3
metal securing tabs (2)
NOTICE: The system board and Mini-Card connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and
on the system board, and realign the card.
NOTICE: Make sure the antenna cables are not under the card when you insert it.
1
system board connector
2
Mini-Card