Filter
Top Products
Version 0.3, 4 December, 2000 DCSE: PowerEdge 1550 Self-Study
Dell Page 67
Icon Function
Controller Properties; click on this icon to display the
propertied if the controller, such as the firmware version,
BIOS version, RAM size, and initiator ID.
Configure Controller; click on this icon to enter the
Configuration Wizard.
Silence the Alarm; Click on this icon to turn off the sound
on the alarm.
Go to Ctrl-M, click on this icon (on the right side at the top
of the screen) to go from the WebBIOS Configuration
Utility to the text based Configuration Utility.
NOTE: This icon will not appear on every screen.
Adapter Selection
The first screen it shows is the controller selection screen. It displays a list
of the installed controllers. Click in the radio button next to the controller
you wish to configure and click the Start button. If you wish to use the
older text based interface then click the Control-M button.