Filter
Top Products
DCSE: PowerEdge 1550 Self-Study Version 0.3, 4 December, 2000
Page 80 Dell
After clicking Accept in the Configuration Preview screen the
WebBIOS will prompt you to Save this Configuration. To save the
configuration, click the Yes button.
After the configuration is saved, a window displays the option to initialize
the new logical drives. After the logical drives are initialized, the Logical
Drives screen displays. To initialize the new drive click the Yes button.
PERC BIOS Error Messages
Message Problem Suggested Solution
Adapter BIOS Disabled.
No Logical Drives
Handled by BIOS
The PERC 3/DC BIOS
is disabled.
Enable the BIOS by pressing <Ctrl>+<H>
at the boot prompt to run the PERC 3/DC
WebBIOS Configuration utility.
Host Adapter at
Baseport xxxx Not
Responding
The BIOS cannot
communicate with the
adapter firmware.
Make sure PERC 3/DC is properly
installed. Check SCSI termination and
cables.
No PERC 3/DC Adapter The BIOS cannot
communicate with the
adapter firmware.
Make sure PERC 3/DC is properly
installed.