Dell 1907FPV Computer Monitor User Manual


 
About Your Monitor: Dell™ 1907FPV Flat Panel Monitor User's Guide
file:///T|/htdocs/monitors/1907FPV/en/about.htm[8/7/2012 10:06:38 AM]
1 VESA mounting holes (100mm) (Behind
attached base plate)
Use to mount the monitor.
2 Regulatory rating label List the regulatory approvals.
3 Security lock slot Use a security lock with the slot to help secure your monitor.
4 Dell Soundbar mounting brackets Attach the optional Dell Soundbar.
5 Barcode serial number label Refer to this label if you need to contact Dell for technical support.
6 Stand removal button Press to release the stand.
7 Cable holder Help organize cables by placing them in the holder.
8 Lock down/release button Push the monitor down, press the button to unlock the monitor, and then
lift the monitor to the desired height.
Bottom View
1 Power
connector
Insert the power cable.
2 Dell Soundbar
power
connector
Connect the power cord for the Soundbar (optional).
3 DVI connector Connect your computer DVI cable.
4 VGA
connector
Connect your computer VGA cable.
5 USB upstream
connector
Connect the USB cable that came with your monitor to the monitor and the computer.
Once this cable is connected you can use the USB connectors on the side and bottom of the
monitor.
6 USB
connector
Connect your USB devices.
NOTE: You can use this connector only after you connect the USB cable to the computer and the USB upstream connector on the monitor.
Side View