Filter
Top Products
Back to Contents Page
Access Panel
Dell™Latitude™2100ServiceManual
Removing the Access Panel
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the battery from the computer.
3. Remove the keyboard from the computer.
4. Remove the three access panel screws from the computer.
5. Close the display and turn over the computer.
6. Remove the four access panel screws.
7. Carefully separate the back corner of the access panel from the palm rest plastics.
8. Using a scribe or flathead screwdriver, disengage the plastic clips that secure the back edge of the access panel to the computer.
9. Remove the access panel, making sure to disengage the plastic clips along the front edge of the computer.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE: You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.