Dell 2408WFP Computer Monitor User Manual


  Open as PDF
of 41
 
LCD Conditioning
Factory Reset
Exit Menu
ResetallOSDsettingstothefactorypresetvalues.
Push to exit the OSD main menu.
PIP
SETTINGS


Back
Mode
When PIP/PBP
activated
PIP/PBP Source
PIP Size
This function brings up a window displaying image from another input source.
PIP/PBP submenu when PIP/PBP OFF(mainsourceis
VGA/DVI-Dinput)
PIP/PBP submenu when PIP/PBP OFF
(mainsourceisVideo
input)


or
PIP/PBP submenu when PIP/PBP ON(mainsourceis
VGA/DVI-Dinput)
PIP/PBP submenu when PIP/PBP ON
(mainsourceisVideoinput)

or
NOTE: When using DVI source, the contrast adjustment is not available.
Push to go back to the main menu.
There is two modes: PIP (Picture in Picture) and PBP (Picture By Picture)
Use and tobrowseand to select "Off", "PIP" or "PBP".
When PIP/PBP is activated, select "Swap" to exchange the input source for the main screen and PIP/PBP window.
Select an input signal for PIP/PBP. (VGA/DVI-D 1/DVI-D 2/DP (DisplayPort)/HDMI/S-Video/Composite/Component)
Use and tobrowseand to select.
Select PIP window size.
Use and tobrowseand to select.
 previous next