Filter
Top Products
22 Installation Guide
Adjusting the Rack Posts (optional)
The position of the rack posts can be adjusted to accommodate systems
of various depths.
1
Open the rack doors.
2
Remove the screws from the bottom and top of the post (see Figure 1-13).
3
Move the post to the desired location inside the side of the rack,
and replace the screws in the corresponding holes.
Figure 1-13. Adjusting the Rack Posts
NOTE: You may now install systems into the rack. Use the white numbered labels
on the front and back of the rack mounting rails to help install products in the rack.
1 screws 2 back rack post
3 front rack post
1
2
3