Filter
Top Products
Option Description
Wireless Radio Control Allows you to enable or disable the feature that automatically switches
from wired or wireless networks without depending on the physical
connection.
• Control WLAN Radio
• Control WWAN Radio
• Control WLAN radio or Control WWAN radio is not selected
(default)
Wake on LAN/WLAN Allows you to enable or disable the feature that powers on the
computer from the Off state when triggered by a LAN signal.
• Disabled: This option is enabled by default
• LAN Only
• WLAN Only
• LAN or WLAN
• LAN with PXE Boot
Block Sleep This option lets you block entering to sleep (S3 state) in Operating
System environment.
Block Sleep (S3 state) - This option is disabled by default.
Peak Shift This option enables you to minimize the AC power consumption during
the peak power times of day. After you enable this option, your system
runs only in battery even if the AC is attached.
Advanced Battery Charge
Configuration
This option enables you to maximize the battery health. By enabling this
option, your system uses the standard charging algorithm and other
techniques, during the non-work hours to improve the battery health.
Disabled (default)
Primary Battery Charge
Configuration
Allows you to select the charging mode for the battery. The options are:
• Adaptive
• Standard
• ExpressCharge: This option is enabled by default.
• Primarily AC use
• Custom
If Custom Charge is selected, you can also configure Custom Charge
Start and Custom Charge Stop.
NOTE: All charging mode may not be available for all the batteries.
To enable this option, disable the Advanced Battery Charge
Configuration
option.
Intel Smart Connect
Technology
This option, if enabled, periodically senses the nearby wireless
connections, while the system is in sleep state. You can use this option
to synchronize the email or other social media application that are
open, when the system enters the sleep state.
51