Dell 320-8277 Computer Monitor User Manual


 
TroubleshootingtheCardReader
Back to Contents Page
CAUTION: Do not remove the device while reading or writing media. Doing so may cause loss of data or malfunction in the media.
Problem
Cause
Solution
Drive letter is not assigned.
(Windows®XP only)
Conflict with network drive letter.
A. Right-click My Computer on the desktop, and then click Manage. Under
Computer Management
click Desk Management.
B. In the list of drives in the right panel, right-click Removable Device
and then click
Letter and Paths.
C. Click Change, and in the drop-down box, specify a drive letter for the
Removable Device
choosing one that is not assigned to the mapped network drives.
D. Click OK, ... then click OK again
Drive letter is assigned, but
the media is not accessible
The media needs reformatting.
Right-click the drive in Explorer and choose Format from the resulting menu.
The media has been ejected
during writing or erasing.
Displays the error message, "Error copying
file or folder."
Displays the error message, "Cannot write
folder (folder name) or file (file name),"
during writing, or, "Cannot remove folder
(folder name) or file(file name),". While
erasing, you cannot write or erase in the
same folder or file name.
Reinsert the media and write or erase again.
Format the media for writing or erasing the same folder or file name.
Despite the disappearance
of the pop-up window, the
media has been ejected
while the LED was blinking.
Although the pop-up window disappears
during writing, if you eject your media while
the LED is still blinking, then you cannot
complete your action on the media.
Format the media for writing or erasing the same folder or file name.
Cannot format or write on
the media.
Write protect switch is enabled.
Verifythatthewrite- protect switch of the media is unlocked.
Card reader is not working
USB interface is not working.
Check that your monitor is powered on.
Reconnect the upstream cable from your computer to the monitor.
Reinsert the media.
Switch off and then turn on the monitor again.
Reboot the computer.