Filter
Top Products
Monitor Specifications
The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor.
Power Management Modes
If you have VESA's DPMS compliance display card or software installed in your computer, the monitor automatically reduces its power consumption when not in
use. This is referred to as Power Save Mode. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically
"wake up". The following table shows the power consumption and signaling of this automatic power-savingfeature:
Activate the computer and wake up the monitor to gain access to the OSD.
Pin Assignments
VGA Connector
3
DisplayPort Connector
4
HDMI Connector
5
DVI Connector-1
6
DVI Connector-2
7
VGA Connector
8
Composite Video Connector
9
ComponentVideoConnectors
10
Audio Out (Support two channel output )
11
USB Upstream Port
12
USB Downstream Port
13
Stand Lock （Use a M3x14 threaded screw to
lock stand, screw not provided）
VESA Modes
Horizontal
Sync
Vertical Sync
Video
Power
Indicator
Power Consumption
Normal operation (with
max luminance, Dell
Soundbar and USB
active)
Active
Active
Active
Blue
132 W (Maximum)
Normal operation
Active
Active
Active
Blue
75 W (Typical)
Active-off mode
Inactive
Inactive
Blanked
Amber
Less than 1 W
Switch off
-
-
-
Off
Less than 1 W
NOTE: This monitor is TCO' 03 power management compatible.
NOTE: Zero power consumption in OFF mode can only be achieved by disconnecting the power cable from the
monitor.
Pin
Number
15-pin Side of the
Connected Signal Cable
1
Video-Red
2
Video-Green
3
Video-Blue
4
GND
5
Self-test
6
GND-R