Filter
Top Products
202 Configuring Switch Information
www.dell.com | support.dell.com
• VLAN ID—Matches the packet’s VLAN ID to the ACE.
• Action—Indicates the ACE forwarding action. The possible field values are:
– Permit—Forwards packets which meet the ACE criteria.
– Deny—Drops packets which meet the ACE criteria.
– Shutdown—Drops packet that meet the ACE criteria, and disables the port to
which the packet was addressed. Ports are reactivated from the Port Configuration,
see "Defining Port Parameters".
Adding a MAC-based ACL:
1 Open the Add ACE to MAC Based ACL page.
2 Click Add. The Add MAC Based ACL page opens.
ACEs Associated with Mac-Based ACLs
3
Define the ACL Name, Source and Destination Address, and Action fields.
4 Click Apply Changes. The MAC-based ACL is defined and the device is updated.
Assigning ACEs to a MAC-based ACL:
1 Open the Add ACE to MAC Based ACL page.
2 Select an ACL in the ACL Name drop-down list.
3 Define the New ACE Priority field.
4 Define the ACL Name, VLAN ID, Source and Destination Address, and Action
fields.
5 Click Apply Changes. The ACE is assigned to the MAC based ACL.