Filter
Top Products
Using Your Projector 53
Projector Status and Control Page
• Projector Status: There are 4 status: Lamp On, Standby, Power Saving and
Cooling. Click the Refresh button to refresh the status and control settings.
• Power Saving: Power Saving can be set to Off, 30, 60, 90, or 120 minutes.
Refer to page 45.
• Alert Status: There are 4 error status: Lamp warning, Low lamp life,
Temperature warning, and Non-original lamp error. Your projector might
lock up in protection mode if any of the alerts is activated. To exit
protection mode, click the Clear button to clear the Alert Status before you
could Power ON your projector.
• Projector Mode: Allows you to select the projector mode, depending upon
how the projector is mounted. There are 4 projection modes: Front
Projection-Desktop, Front Projection-Ceiling Mount, Rear Projection-
Desktop and Rear Projection-Ceiling Mount
• Source Select: The Source Select menu allows you to select your projector
input source. You can select VGA-A, VGA-B, S-V
IDEO, COMPOSITE VIDEO,
HDMI and DisplayPort.
• Video Mode: Select a mode to optimize the display image based on how the
projector is being used:
-
Presentation:
Best for presentation slides.