Back to Contents Page
Modem
Dell™Inspiron™6400/E1505ServiceManual
Removing the Modem
Replacing the Modem
Removing the Modem
1. Follow the instructions in Before Working Inside Your Computer.
2. Turn the computer upside-down, loosen the two captive screws on the cover, and remove the cover from the computer.
3. Remove the M2 x 3-mm screw that attaches the modem to the system board.
4. Pull up on the pull-tab to disconnect the modem from the modem connector on the system board.
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, you must remove the main battery (see Before Working Inside Your Computer) before you
begin working inside the computer.
1
modem connector on system board
2
pull-tab
3
modem
4
modem cable
5
M2 x 3-mm screw