Dell 7M291 Personal Computer User Manual


 
8 Safety Instructions
www.dell.com | support.dell.com
230 V/50 Hz in some regions in the Caribbean and South America
and most of Europe, the Middle East, and the Far East
NOTE: Fixed-voltage power supplies and auto-select power supplies do
not require a voltage selection switch. Your power supply may not have
this switch. Check the regulatory label on the outside of the computer for
your power supply type.
Also be sure that your monitor and attached devices are electrically
rated to operate with the AC power available in your location.
To avoid shorting out your computer when disconnecting a network
cable, first unplug the cable from the network adapter on the back of
your computer, and then from the network jack. When reconnecting a
network cable to your computer, first plug the cable into the network
jack, and then into the network adapter.
To help avoid possible damage to the system board, wait 5 seconds
after turning off the computer before disconnecting or connecting a
non-USB device from the computer.
To help prevent electric shock, plug the computer and device power
cables into properly grounded power sources. These cables are
equipped with three-prong plugs to help ensure proper grounding. Do
not use adapter plugs or remove the grounding prong from a cable. If
you must use an extension cable, use a three-wire cable with properly
grounded plugs.