Dell 9150 Computer Hardware User Manual


 
Removing and Installing Parts 83
4
If your computer includes a card retention mechanism:
a
Pivot the mechanism upward and gently squeeze in on the sides to release the
mechanism from the two tab slots holding it in place.
b
Set the retention mechanism aside in a secure location.
NOTE: For full-length PCI-E cards, if a "piano" bracket is present on your computer you need to rotate it
upward by pressing the tabs on the side of the bracket toward each other.
5
If you are installing a new card, remove the filler bracket to create a card-slot opening. Then
continue with step 7.
6
If you are replacing a card that is already installed in the computer, remove the existing card.
If necessary, disconnect any cables connected to the card. If your card includes a retention
mechanism, remove the top of the retention mechanism by pressing the tab and pulling up
on the top.
NOTE: For full-length PCI-E cards, if a "piano" bracket is present on your computer you need to rotate it
upward by pressing the tabs on the side of the bracket toward each other.
card
retention
door
re
l
ease ta
b
car
d
retent
i
on mec
h
an
i
sm
*
*"piano" bracket
*may not be present on all computers