Filter
Top Products
Installing the Hard Drive
1. If a 2.5–inch or 3.5–inch hard drive is installed, place the hard drive to the hard-drive caddy until it
snaps to its place.
2. Flex the hard-drive bracket and then insert the hard drive into the bracket.
3. Slide the hard-drive bracket into its compartment and close the hard-drive bracket clasp.
4. Install the front cover.
5. Follow the procedures in After Working Inside Your Computer.
Removing the Left Cover
1. Follow the procedures in Before Working Inside Your Computer.
2. Pull up the cover release latch on the side of the computer.
3. Lift the cover upward to a 45–degree angle and remove it from the computer.
17