Filter
Top Products
Installing the Power Switch
1. Slide the power switch in through the front of the computer.
2. Secure the power-switch cable to the chassis.
3. Thread the power-switch cable into the chassis clips.
4. Connect the power-switch cable to the system board.
5. Install the:
a. optical drive
b. front bezel
c. cover
6. Follow the procedures in After Working Inside Your Computer.
Removing the Input/Output (I/O) Panel
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. cover
b. front bezel
3. Disconnect the I/O panel, data, and USB data cables from the system board.
26