Filter
Top Products
15. expansion-card slots 16. security-cable slot
17. padlock ring 18. mouse connector
19. network connector 20. serial connector
21. line-out connector
Removing the Cover
1. Follow the procedures in Before Working Inside Your Computer.
2. Pull up the cover release latch, and lift the cover upwards to remove it from the computer.
Installing the Cover
1. Align the cover along its tabs on the chassis of the computer.
2. Press down on the cover till it clicks into place.
3. Follow the procedures in After Working Inside Your Computer.
Removing the Intrusion Switch
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove the cover.
3. Disconnect the intrusion-switch cable from the system board.
4. Slide the intrusion switch toward the bottom of the chassis and remove it from the computer.
9