Filter
Top Products
Removing and Installing Parts 135
4
Disconnect the power and data cables from the back of the floppy drive.
NOTE: If you have installed a PCI Express x16 card, this card may cover the floppy
drive connectors. Remove this card before disconnecting the floppy-drive cables
(see "Removing a PCI/PCI Express Card
" on page 121
).
5
Disconnect the data cable from the system board.
6
Remove the two screws securing the floppy drive.
7
Slide the floppy drive out through the front of the computer.
1 floppy drive 2 data cable 3 power cable
4 system board
connector
5 screws (2)
2
4
3
1
5
book.book Page 135 Thursday, June 14, 2007 6:23 PM