Filter
Top Products
© 1998 Oasis Imaging Products, Inc. Page 5 of 9
12. Remove the drum and replace during
reassembly (Fig. 12).
Fig. 12
Fig. 13
14. Lift up the end of the small spring
that comes in contact with the developer
roller end post, and then remove the
stabilizer plate (Fig.14).
Fig. 14
13. Remove the fill plug and clean out
residual toner from the hopper.
Using a small flat screw driver, pry up the
locking tab that secures the developer roller
stabilizer plate (Fig. 13).