Filter
Top Products
Power Management Modes
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in
use. This is referred to as 'Power Save Mode'. If input from keyboard, mouse or other input devices is detected by the computer, the monitor automatically
resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature:
Activate the computer and the monitor to gain access to the OSD.
Dimensions (with stand):
Height
389.66 mm (15.34 inches)
Width
374.7 mm (14.75 inches)
Depth
<136.7 mm (5.38 inches)
Weight
Monitor (Stand and Head)
4.85kg (10.67 lb)
Monitor Flat panel only (VESA Mode)
4.0 kg (8.8 lb)
Weight with packaging
6.0 kg (13.2 lb)
Environmental
Temperature:
Operating
5°to35°C(41°to95°F)
Nonoperating
-20°to60°C(-4°to140°F)
Humidity:
Operating
10% to 80% (noncondensing)
Nonoperating
5% to 90% (noncondensing)
Altitude:
Operating
3,657.6 m (12,000 ft) max
Nonoperating
12,192 m (40,000 ft) max
Power Management Definition
VESA's Mode
Video
H-sync
V-sync
Power Used
Power Saving
LED color
ON
Active
Yes
Yes
maximum 40W
typical 34W
0%
Green
Power Saving
Blanked
No
Yes
<=2W
>80%
Amber
Blanked
Yes
No
<=2W
>80%
Amber
Blanked
No
No
<=2W
>80%
Amber
Switch Off
Blanked
--
--
<=1W
>80%
Off
NOTE: The OSD will only function in the normal operation mode. Otherwise one of the following messages will appear
depending upon the selected input.