Filter
Top Products
D
OK / Input Source
Select
Use this button to select the input source or select an OSD menu option.
Use the Input source button to select one of the two different video signals that may be connected to your monitor:
VGA input
DVI-D input
If both VGA and DVI cables are connected to one Computer, this monitor displays an image automatically as long as a video signal is
present in either VGA or DVI outputs. On a display connected to two Computers, set equal time for both screen savers. The video input
from the movement of the first mouse will activate the display.
As you cycle through the inputs, the following messages appear to indicate currently selected input source. It may take 1 or 2 seconds
for the image to appear.
or
or
If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below
appears.
or
E
Power button
(with power light
indicator)
Use the Power button to turn the monitor on and off.
The blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.
Using the On-Screen Display (OSD) Menu
Accessing the Menu System
NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you
change the settings and then wait for the OSD menu to disappear.
1. Push the MENU button to launch the OSD menu and display the main menu.
Main Menu for Analog (VGA) Input