Filter
Top Products
36 Operating the Monitor Operating the Monitor 37
OSD Warning Messages
When the monitor does not support a particular resolution mode you will
see the following message:
LCD
Conditioning
Helps reduce minor cases of image retention.
Depending on the degree of image retention, the
program may take some time to run. You can enable
this feature by selecting “Enable”.
Reset Other
Settings
Select this option to restore default other settings,
such as DDC/CI.
Factory
Reset
Reset all OSD settings tothe factory preset values.
Personalize User can select from “Preset Modes”, “Brightness/
Contrast”, “Auto Adjust”, “Input Source”, “Aspect Ratio” and
set as shortcut key.
Reset
Personalization
Allows you to restore shortcut key to the default setting.
This means that the monitor cannot synchronize with the signal that it is
receiving from the computer. See Monitor Specifications for the Horizontal
and Verticalfrequency ranges addressable by this monitor. Recommended
mode is 1920 x 1080.
You will see the following message before the DDC/CI function is disabled.
When monitor enters Power Save mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the OSD