Filter
Top Products
Installing the Display-Hinge Cover
1. Place the display-hinge cover and tighten the screws to secure the display-hinge cover to the computer.
2. Install battery.
3. Follow the procedures in
After Working Inside Your Computer
.
Removing the Heatsink
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove:
a) SD card
b) battery
c) base cover
d) mSATA
e) keyboard trim
f) keyboard
g) palmrest
h) display-hinge cover
i) display assembly
3. Remove the screws that secure the heatsink to the computer.
4. Perform the following steps as shown in the illustration:
a) Lift the heatsink from the computer [1].
b) Remove the heatsink from the computer [2].
24