Dell H967N Power Supply User Manual


 
26
|
Installation
3 Plug the EBM cable into the UPS battery connector (see Figure 17).
Secure the battery connector cover to the UPS rear panel using the screws removed in Step 1.
Figure 17. EBM Installation
Installing the UPS
To install the UPS:
1 If you plan to use Dell UPS Management Software, connect your computer to the USB port using
the supplied cable. For more information about communication options, see page 54.
2 If your rack has conductors for grounding or bonding of ungrounded metal parts, connect the
ground cable (not supplied) to the ground bonding screw. See “Identifying the UPS Rear Panels”
on page 15 for the location of the ground bonding screw for each model.