Filter
Top Products
Replacing the stylus-holder
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Place the stylus holder and stylus lock on the palmrest and keyboard
assembly.
2 Align the screw hole on the stylus holder and stylus lock with the screw
hole on the palmrest and keyboard assembly.
3 Replace the screw that secures the stylus holder and stylus lock to the
palmrest and keyboard assembly.
4 Insert the stylus into the stylus holder and push to snap it in place.
Post-requisites
1 Replace the display assembly.
2 Replace the battery.
3 Replace the base cover.
70