Filter
Top Products
Removing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the display assembly.
4 Remove the display back-cover and antenna assembly.
5 Remove the camera.
Procedure
1 Peel off the adhesive tape and lift the latch to disconnect the display
cable from the display panel.
2 Disconnect the Windows-button board cable.
3 Peel off the adhesive tape, lift the connector latch to disconnect the
touch-screen board cable from the touch-screen board.
4 Remove the camera cable from the routing guides on the display bezel.
5 Lift the connector latch and disconnect the display cable from the touch
board.
6 Note the display cable routing and remove the display cable from the
routing guides on the display bezel.
89