Filter
Top Products
Disconnect the CCFL cable from the bottom of the panel.3.
Disconnect the flex cable from the LCD panel.4.
Lift the LCD panel from the back cover.5.
LED/Inverter Board Removal
Remove the two screws from the LED/inverter board.1.
Disconnect the flex cable from the ZIF connector on the bottom side of the LED/inverter board.2.
Flex Cable Removal
Remove the grounding tape that secures the wire harness to the back cover.1.
Carefully snap out the flex cable pass-though housing from the back cover.2.
Ease the flex cable over to one side.3.
Insert a flat instrument into the wide opening of the pass-through housing.
Be careful not to damage the flex cable.
4.
Carefully ease the cover from the pass-through housing.5.
Removing and Replacing Parts: Dell Inspiron 5000 Series
file:///c|/docs/blanco E-doc/removing.htm (29 of 29) [9/1/2000 3:32:00 PM]