Filter
Top Products
16
How to deploy the Dell M8024 family of switches in a Cisco Nexus network
Figure 12: Configuring a port channel on the Cisco Nexus 5010 switch.
3. Connect cables from the Cisco Nexus 5010 switch to the Dell
PowerConnect M8024 switch.
Scenario 2: Configuring VLANs on the internal ports of the Dell PowerConnect M8024
switch
On the Dell PowerConnect M8024 switch
1. Log into the switch.
2. Select SystemÆOperational ModeÆOperational Mode
Configuration.
3. In the Operational Mode Configuration screen, select Enable in
the Simple Mode drop-down menu, and left-click Apply Changes
(see Figure 13). The switch will reset after this and you will need
to log in again.
Figure 13: Simple Mode configuration on the Dell PowerConnect M8024 switch.
4. Select SwitchingÆPort AggregatorÆInternal Port VLAN
Configuration.
5. In the Internal-Port drop-down menu, select a port (we chose
1/xg1). (See Figure 14.)