Filter
Top Products
21
How to deploy the Dell M8024 family of switches in a Cisco Nexus network
3. Connect cables from the Cisco Nexus 5010 switch to the Dell
PowerConnect M8024 switch. From this point onward, any VMs
configured with VLAN tagging will be encapsulated with
appropriate VLAN tags.
Scenario 4: Configuring multiple Port Aggregation Groups and dedicating specific Uplinks
On the Dell PowerConnect M8024 switch
1. Log into the switch.
2. Select SystemÆOperational ModeÆOperational Mode
Configuration.
3. In the Operational Mode Configuration screen, select Enable in
the Simple Mode drop-down menu and left-click Apply Changes
(see Figure 21). The switch will reset after this and you will need
to log in again.
Figure 21: Simple Mode configuration on the Dell PowerConnect M8024 switch.
4. Select SwitchingÆPort AggregatorÆ Port Configuration (see
Figure 22).