Filter
Top Products
Figure 39. Removing and installing an expander card
1. screw (3) 2. expander-card cable connector that
connects to the connector on the
system board (J_PERC)
3. expander card cable 4. expander card
5. guide pin (2)
Next steps
1. Install the expander card.
Related Links
Installing an expander card
Removing the blade
Removing the system cover
Removing a hard drive/SSD cage
Removing a 2.5 inch (x4) SATA hard drive/SSD backplane
Removing a 2.5 inch (x4) SAS hard drive/SSD backplane
Removing a 2.5 inch (x2) SATA hard drive/SSD plus 2.5 inch (x2) PCIe SSD backplane
Removing a 1.8 inch (x12) SAS SSD backplane
107