Filter
Top Products
Related Links
Removing the blade
Removing and installing the system cover
Removing the system cover
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove the system cover to service other components inside the system.
1. Ensure that you read the Safety instructions.
2. Turn off the blade using CMC.
3. Remove the blade from the enclosure.
4. Install the I/O connector cover.
Steps
1. Press the release buttons and slide the cover toward the back of the blade.
2. Lift the cover away from the blade.
40