Filter
Top Products
Dell M8428-k Hardware Reference Manual 27
53-1001980-01
Appendix
A
Dell M8428-k specifications
In this chapter
•NPIV Mode default port mapping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
•Processor and memory specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
•Weight and physical dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
•Facility requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
•Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
•Architectural specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
•Supported mezzanine cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
•Fibre Channel standards compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
•Regulatory compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
•Environmental regulation compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
NPIV Mode default port mapping
The switch module contains 28 total ports. Of these, F_Ports are ports 1-24 and N_Ports are ports
0 and 25-27.
In NPIV mode, the switch module F_Ports are mapped to N_Ports. The following table lists the
factory-default F_Port to N_Port mapping for NPIV mode.
Ports 17-24 are the eight external CEE ports.
Processor and memory specifications
The processor and memory installed in the switch module are shown in Table 5.
TABLE 4 NPIV mode port mapping
F_Ports mapped to N_Ports
1-4, 17, 18 25
5-8, 19, 20 26
9-12, 21, 22 27
13-16, 23, 24 0