Filter
Top Products
Processor 67
When the processor is correctly seated, all four corners are aligned at the
same height. If one or more corners of the processor are higher than the
others, the processor is not seated correctly.
NOTICE: To prevent intermittent contact between the ZIF-socket cam screw and
the processor when removing or replacing the processor, press to apply slight
pressure to the center of the processor while turning the cam screw.
2
Tighten the ZIF socket by turning the cam screw clockwise to secure the
processor to the system board.
3
Peel the back of the thermal cooling pad and adhere the pad to the portion
of the thermal-cooling assembly that covers the processor.
4
Replace the processor thermal-cooling assembly (see "Replacing the
Processor Thermal-Cooling Assembly" on page 62).
5
Update the BIOS using a flash BIOS-update program CD. See ("Flashing
the BIOS" on page 85).