Filter
Top Products
6. Follow the procedures in After Working Inside Your computer.
Removing the SIM Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. base cover
c. SSD card
d. keyboard trim
e. keyboard
f. palmrest
3. Perform the following steps as shown in the illustration:
a. Disconnect the SIM board cable from its connector on the system board [1] [2].
b. Remove the screw that secures the SIM board cable to the computer [3].
c. Remove the SIM board from the computer [4].
Installing the SIM Board
1. Place the SIM board on the computer.
2. Tighten the screw to secure the SIM board to the computer.
3. Connect the SIM board cable to its connector on the system board..
4. Install:
a. plamrest
b. keyboard
c. keyboard trim
d. SSD card
e. base cover
f. battery
5. Follow the procedures in After Working Inside Your computer.
20