e. WWAN card
f. plamrest
g. SSD card
h. keyboard
i. keyboard trim
j. base cover
k. battery
5. Follow the procedures in After Working Inside Your computer.
Removing the Coin-Cell Battery
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. base cover
c. keyboard trim
d. keyboard
e. SSD card
f. palmrest
g. system board
3. Perform the following steps as shown in the illustration:
a. Disconnect the coin-cell cable from its connector on the system board [1].
b. Pry the coin-cell battery to remove from the system board [2].
Installing the Coin-Cell Battery
1. Place the coin-cell battery on the system board.
2. Connect the coin-cell battery cable to the system board.
3. Install:
a. system board
b. plamrest
c. SSD card
30