Filter
Top Products
134 Command Groups
area virtual-link
retransmit-interval
Configures the retransmit interval for the OSPF
virtual interface on the virtual interface identified
by
areaid
and
neighbor
.
ROSV3
area virtual-link
transmit-delay
Configures the transmit delay for the OSPF
virtual interface on the virtual interface identified
by
areaid
and
neighbor
.
ROSV3
default-information
originate
Controls the advertisement of default routes. ROSV3
default-metric Sets a default for the metric of distributed routes. ROSV3
distance ospf Sets the route preference value of OSPF in the
router.
ROSV3
enable Resets the default administrative mode of OSPF
in the router (active).
ROSV3
exit-overflow-interval Configures the exit overflow interval for OSPF. ROSV3
external-lsdb-limit Configures the external LSDB limit for OSPF. ROSV3
ipv6 ospf Enables OSPF on a router interface or loopback
interface.
IC
ipv6 ospf area Sets the OSPF area to which the specified router
interface belongs.
IC
ipv6 ospf cost Configures the cost on an OSPF interface. IC
ipv6 ospf dead-interval Sets the OSPF dead interval for the specified
interface.
IC
ipv6 ospf hello-interval Sets the OSPF hello interval for the specified
interface.
IC
ipv6 ospf mtu-ignore Disables OSPF maximum transmission unit
(MTU) mismatch detection.
IC
ipv6 ospf network Changes the default OSPF network type for the
interface.
IC
ipv6 ospf priority Sets the OSPF priority for the specified router
interface.
IC
ipv6 ospf retransmit-
interval
Sets the OSPF retransmit interval for the
specified interface.
IC
Command Description Mode
a
2CSPC4.XModular-SWUM200.book Page 134 Thursday, March 10, 2011 11:18 AM