Filter
Top Products
Using a Battery 63
To manually enter hibernate mode:
•
C
lick the
Start
button, click
Turn off computer
, and then click
Hibernate
.
or
• Depending on how you set the power management options in the
Power Options Properties
window
or the QuickSet Power Management Wizard, use one of the following methods to enter hibernate
mode:
– Press the power button.
– Close the display.
– Press <Fn><F1>.
NOTE: Some ExpressCards may not operate correctly after the computer exits hibernate mode. Remove and
reinsert the card (see "Removing a Card" on page 83), or simply restart (reboot) your computer.
To exit hibernate mode, press the power button. The computer may take a short time to exit hibernate
mode. You cannot make the computer exit hibernate mode by pressing a key or touching the touch pad.
For more information on hibernate mode, see the documentation that came with your operating system.
Configuring Power Management Settings
You can use the QuickSet Power Management Wizard or Windows Power Options Properties to
configure the power management settings on your computer.
• For more information about QuickSet, right-click the icon in the taskbar and click
Help
.
• To access the
Power Options Properties
window, click the
Start
button, point to
Control Panel
→
Performance and Maintenance
, and then click
Power Options
. For information on any field in the
Power Options Properties
window, click the question mark icon on the title bar and then click on the
area where you need information.
book.book Page 63 Tuesday, February 13, 2007 1:50 PM