Filter
Top Products
3. Open the system.
4. Remove the cooling shroud.
5. Disconnect the internal cooling fan power cable from the system board.
6. Release the internal cooling fan power cable from the securing clips on the chassis and system board.
CAUTION: Do not remove or install the internal cooling fan by holding the blades.
7. Press the release tab on the internal cooling fan and, holding the internal cooling fan by the sides, slide it out in the
direction of the arrow marked on the fan.
Figure 37. Removing and Installing the Internal Cooling Fan
1. arrow
2. internal cooling fan
3. internal cooling fan power cable
4. release tab
80