Filter
Top Products
250 Adding and Replacing Parts
Installing a Floppy Drive (Desktop Computer)
1
Follow the procedures in "Before You Begin" on page 151.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 153).
3
Remove the drive panel (see "Removing the Drive Panel" on page 233).
4
Pull the desktop drive retention insert by the handle and set it aside in a
safe place.
5
If another device is installed in the FlexBay, remove that device (see the
appropriate removal instructions in this section).
NOTICE: If metal shields are present in your computer configuration, they must be
installed at all times while your computer is in use or your computer may not
function properly.
1 drive retention insert 2 floppy drive
1
2