Filter
Top Products
Option Description
• SATA2–HDD2
• SATA2–ODD0
• SATA3–HDD1
• SATA2–HDD3
• SATA2–ODD1
Default Setting: All drives are enabled.
NOTE: If the hard drives are connected to a RAID controller card,
the hard drives will display {none} in all the fields. The hard drives
can be seen in the RAID controller card BIOS.
• T7610 • SATA2–ODD0
• SATA2–ODD1
Default Setting: All drives are enabled.
NOTE: If the hard drives are connected to a RAID controller card,
the hard drives will display {none} in all the fields. The hard drives
can be seen in the RAID controller card BIOS.
SMART Reporting This field controls if the hard drive errors for the integrated drives are
reported during system startup. This technology is part of the SMART
(Self Monitoring Analysis and Reporting Technology) specification.
• Enable SMART Reporting - This option is disabled by default.
USB Configuration Allows you to enable or disable the internal USB configuration. The
options are:
• Enable Boot Support
• Front USB Ports
• Back Quad USB Ports
• Enable internal USB ports
• USB3 Ports
PCI Bus Configuration Allows you to configure the PCI buses. The options are:
• 256 PCI Buses (Default)
• 128 PCI Buses
• 64 PCI Buses
Memory Map IO above 4GB Allows you enable or disable Memory Map IO above 4GB.
• Memory Map IO above 4GB - This option is disabled by default.
Optional HDD Fans Allows you to control the HDD fans.
Default Setting: depends on the system configuration
Audio Allows you enable or disable the audio feature.
Default Setting: Audio is enabled
SAS RAID Controller (T7610 only) Allows you to control the operation of the integrated SAS RAID HDD
controller.
56