Filter
Top Products
10
Removing The Input/Output Panel
1. Follow the procedures in
Before Working Inside Your Computer
.
2. Remove the
rear cover
.
3. Remove the
rear stand
.
4. Remove the
rear I/O cover
.
5. Remove the
system board shield
.
6. Remove the I/O panel away from the chassis.
Installing The Input/Output Panel
1. Place the system board shield on the chassis.
2. Tighten the screws to secure the system board shield.
3. Install the I/O panel securely on the system board shield.
4. Install the
rear I/O cover
.
5. Install the
rear stand
.
6. Install the
rear cover
.
7. Follow the procedures in
After Working Inside Your Computer
.
33