Filter
Top Products
Heat Sink 29
9
Heat Sink
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 13.
2
Remove the power-light board. See "Removing the Power-Light Board" on
page 15.
3
Remove the battery. See "Removing the Battery" on page 17.
Removing the Heat Sink
1
In sequential order (indicated on the heat sink), remove the screws that
secure the heat sink to the system board.
2
Lift the heat sink off the system board.
1 heat sink 2 screws (4)
1
2
OM_Book.book Page 29 Tuesday, September 25, 2012 2:30 PM