Filter
Top Products
Display Assembly 53
15
Display Assembly
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Prerequisites
1
Remove the base cover. See "Removing the Base Cover" on page 13.
2
Remove the power-light board. See "Removing the Power-Light Board" on
page 15.
3
Remove the battery. See "Removing the Battery" on page 17.
4
Remove the speakers. See "Removing the Speakers" on page 19.
Removing the Display Assembly
1
Disconnect the display cable from the system-board connector.
1 display cable
1
OM_Book.book Page 53 Tuesday, September 25, 2012 2:30 PM