Filter
Top Products
18 | Removing the NFC card
Removing the NFC card
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
"Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9. For additional
safety best practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base-cover assembly. See "Removing the Base-Cover Assembly" on
page 10.
2 Remove the battery. See "Removing the Battery" on page 16.
Procedure
1 Peel off the adhesive foams from the NFC card and the NFC cable.
2 Lift the connector latches and disconnect the NFC cable and the antenna cable
from the NFC card.
3 Using a plastic scribe, pry out the NFC card from the palm-rest assembly.
1 adhesive foams (2) 2 NFC card
3 antenna cable 4 NFC cable
1
2
4
3