Filter
Top Products
Removing the I/O Board | 39
Removing the I/O Board
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
"Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9. For additional
safety best practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base-cover assembly. See "Removing the Base-Cover Assembly" on
page 10.
2 Remove the battery. See "Removing the Battery" on page 16.
3 Remove the wireless card. See"Removing the Wireless Card" on page 26.
Procedure
1 Using the pull tabs, disconnect the I/O-board cable from the system board and I/O
board.
1 I/O-board cable 2
pull tabs (2)
1
2