Filter
Top Products
Ethernet Communication Module DVPEN01-SL
DVP-PLC Operation Manual
39
7. After the password is cleared, you can modify the parameters.
6.4 When the Password is Lost (Returning to Default Setting by RS-232)
Application Returning to default setting by RS-232
Network
requirement
(1) DVPEN01-SL is set with a password.
(2) The password is forgotten.
1. Use DVPACAB2A30 cable to connect the PC and DVPEN01-SL and open the setup page. Open
the “reset to default setting”” pages. Click on “Unlock”.