Filter
Top Products
Configuring RADIUS
19
Configuring a RADIUS Client
1. Right-click the desired Physical IMG and select New Radius Client.
The Radius Client pane appears.
2. The following fields are automatically populated. Change any default values, if
required.
Radius Client Network Interface - IP Address of the Physical IMG.
Authentication Port - 1812
Accounting Port - 1813
Primary Authentication Server - First Authentication Server Configured
Primary Accounting Server - First Accounting Server Configured
3. Select a Secondary Authentication Server from the Secondary Authentication
Server field, if required.
4. Select a Secondary Accounting Server from the Secondary Accounting Server
field, if required.
5. To enable RADIUS Client Debug Mode, select On in the RADIUS Client Debug
Mode field. When Debug Mode is On, calls will be completed whether the RADIUS
server is active or not. The IMG will not require authentication from the RADIUS
server to complete a call and no billing information will be logged.
See the Radius Client pane reference for field details.