Filter
Top Products
Dialogic® 3000 and 4000 Media Gateway Series Quickstart Guide
page 31
Suppliers Declaration of Conformity
Declaration of Conformity
No: D0018
Revision 01
The equipment described below is declared to be in conformity with the following applicable national and international standards. The
conformity is valid ONLY when the equipment is used in a manner consistent with the manufacturer’s recommendations and the
reference documents.
Equipment Type(s): Diva 2-PRI, V-2PRI
Diva 4-PRI, V-4PRI
Document No / Edition /Date Title
IEC 60950-1: 2001
Safety of Information Technology Equipment
UL/CSA 60950-1 – 1
st
Edition (2003) Safety of Information Technology Equipment
EN 60950-1: 2001
Safety of Information Technology Equipment
FCC, 47 CFR Part 15, Class B digital device Radio Frequency Devices - Subpart B - Unintentional Radiators
ICES-003 Issue 4 - Feb 2004, Class B Interference-Causing Equipment Standards - Digital Apparatus
EN 55022: 1998, Class B Limit Information Technology Equipment - Radio Disturbance Characteristics
EN 55024: 1998 Information Technology Equipment - Immunity Characteristics
TIA-968-A: Oct 2002, A1: July 2003, A2: Jan
2003, A3: Dec 9, 2004
Technical Requirements for Connection of Terminal Equipment to the Telephone Network
CS-03 Issue 9 Part VI: Nov 2004 Specification for Terminal Equipment, Terminal Systems, Network Protection Devices, Connection Arrangements
TBR4: Nov 95, A1: Dec 97 Attachment requirements for terminal equipment to connect to an ISDN using ISDN primary rate access
AS/NZS 60950: 2000, A1: 2003 Safety of Information Technology Equipment
AS/ACIF S038: 2001 Requirements for ISDN Primary Rate Access Interface
Additional information:
Australia test reports: Futjisu/Siemens report CER+EIC04-0004+E01, dated 26/10/2004 covers EN55022
Futjisu/Siemens report CER+EIC06-0005+S01, dated 11/07/2004 covers AS/NZS 60950
Eicon internal report, dated 19/01/2006 and TBR4 layer 1 report # 3-4143-1-2/04 from Cetecom, dated
03/11/2004 and layer 2, 3 report 98/164/HJ from Deutsche Telekom AG, dated 30/07/1998 covers AS/ACIF S038
Regions:
European Economic Area (EEA): Dialogic Corporation (address below) declares the equipment in compliance with the essential requirements of EC Council
Directives: 1999/5/EC - R&TTE: 2006/95/EC - Safety/LVD: 89/336/EEC – EMC
USA: Dialogic Corporation (address below) make this SDoC as Responsible Party for equipment registered with ACTA as number: US: E3SDDNAN800-820
Canada: Dialogic Corporation (address below) is the Declaring Party for equipment registered with Industry Canada as number: IC: 885E-803016
Australia / New Zealand: Supplier Code N964 [Dialogic
Pty Ltd.
Level 12, 1 Pacific HighwayNorth Sydney NSW 2060] ACN: 064 824 899
Any other region where the Regulatory Requirements are satisfied by compliance to the standards declared above.
This Declaration of Conformity is issued by
Dialogic Corporation
, which is solely responsible for the declared compliance.
Company Address:
Dialogic Corporation
9800 Cavendish 5
th
floor
Montreal, Quebec
Canada, H4M 2V9
Authorized signature, name and function:
Gaetan Hogue - Appro als Manager
v
Date:
25, January, 2007
Dialogic Distribution Limited, our location in Europe operates from:
Unit 4034 Kingswood Avenue Citywest Business Campus, Saggart, Co. Dublin, Ireland.
Copies of this Declaration of Conformity may be downloaded at http://www.dialogic.com/declarations