Filter
Top Products
6.4 VGA
Pin 11 is keyed for easy, error-free connection. When connecting the VGA cable, align the side with the
red stripe to pin 1 and attach the .2mm header to the Morpheus. Connect the cable’s DB15 female
connector to the monitor’s DB15 male connector for video output to monitor. Diamond Systems’ cable kit
C-MOR-KIT includes a cable for this connector.
Red
1 2 Green
Blue 3 4 NC
GND 5 6 GND
GND 7 8 GND
Vcc 9 10 GND
KEY 11 12 VDDAT
HSYNC 13 14 VSYNC
VDCLK 15 16 NC
6.5 LCD
This connector is a 40-pin box header (Hirose DF-40DS-1.2C) for Flat Panel VGA (LCD) connection. To
obtain video out on the LCD, attach a cable from the LCD to the Morpheus connector. Diamond Systems
does not provide a cable for this connector.
VCC5V
1 2 VCC5V
GND 3 4 GND
VCC3V 5 6 VCC3V
NC 7 8 GND
FPD0 9 10 FPD1
FPD2 11 12 FPD3
FPD4 13 14 FPD5
FPD6 15 16 FPD7
FPD8 17 18 FPD9
FPD10 19 20 FPD11
FPD12 21 22 FPD13
FPD14 23 24 FPD15
FPD16 25 26 FPD17
FPD18 27 28 FPD19
FPD20 29 30 FPD21
FPD22 31 32 FPD23
GND 33 34 GND
SHFCLK 35 36 VSYNC
M(DE) 37 38 HSYNC
ENABLK 39 40 ENAVEE
Morpheus CPU User Manual V1.01 Page 10